96-02 3rd Gen 4Runner Panhard Correction Kit (PCK)®

The Original PCK® - Weld-on bracket kits to correct the Panhard bar angle on 2-4.5" of lift.

The Panhard Correction Kit returns the panhard bar to horizontal (per the original design), eliminates the need for an aftermarket adjustable panhard bar to recenter the axle, and, in most cases (up to 4 inches of lift), raises the roll center for improved handling (a 4-4.5 inch lift maintains the roll center of an adjustable panhard).

The lift bracket raises the axle-end of the panhard bar 2 inches by itself without interfering with the frame under full flex with factory bump stops in place.

The drop bracket is selectable for 2, 3, and 4-inch lift heights.

Includes:

• (1) Lift Bracket
• (1) Drop Bracket
• (2) 3mm Hardened Steel Spacers
• (1) eimkeith Logo Decal

Material: 

• Axle Side: 3/16" (0.1875") Steel
• Frame Side: 0.120" Steel 

If you’re here, you already know what the eimkeith PCK® is – and what it does.

If not, you can check out the 3rd Generation 4Runner version here – and read about its origins here on a thread from T4R.org