Upper Link Mount Reinforcement

So you have your LLS (Lower Link Mount Reinforcement Skids) welded on and you’re good to go, right?  Yep.
– Until you twist and tear your axle side upper link mount!

To combat this, I made the ULR (- Upper Link Mount Reinforcement) kit that you see below.  It’s designed to slide right over the factory mount & weld up, after trimming out the weird corner of the factory mount that prohibits the use of big aftermarket joints up there.  That’s right, you now have room to run something as big as a Metal Cloak joint (!).

Interested?  Get yourself a set!


Send my 3rd Gen ULR to me in –


(then check out the installation instructions here on T4R.com)